Venues
İstanbul Fuar Merkezi (CNR Expo Yeşilköy)
İstanbul·Yeşilköy Mah. Atatürk Cad. No: 5/5, 34149 Bakırköy, İstanbul
İstanbul Fuar Merkezi (CNR Expo Yeşilköy) is a fairground in Yeşilköy, Bakırköy, close to the shoreline and the city centre, and one that publishes the technical data for each of its halls on its own site.
Venues
Venue data, and what it means for the stand
Every figure below comes from the venue’s own published data. Nothing that could not be verified was written.
- Halls
- Numbered halls, Salon 01 to Salon 11
- Salon 01
- 10,800 m² · 14.00 m clear height · 5.80 m maximum stand height · 2,250 kg/m² floor load · 700 kW
- Salon 04
- 11,200 m² · 10.40 m clear height · 2,250 kg/m² floor load · 800 kW
- Salon 09
- 5,390 m² · 9.00 m clear height · 5.80 m maximum stand height · 2,250 kg/m² floor load · 400 kW
- Air and water pressure
- 5–7 bar compressed air, 4–6 bar water (as listed for halls 01 and 09)
Every hall has its own data sheet — read yours
İFM publishes area, clear height, maximum stand height, floor load capacity, door dimensions and power supply for each hall on its own site — one of the few Turkish fairgrounds that does. The values differ substantially between halls: clear height runs from 9.00 m to 14.00 m across the halls we were able to verify. So there is no such thing as “the İFM height limit”; you read the sheet for whichever hall your stand falls in.
Freight door sizes differ hall to hall
Three verified examples show the spread: the A door of Salon 01 is 700 × 1,088 cm, Salon 09’s is 620 × 740 cm and Salon 04’s is 564 × 564 cm. Your largest single piece — a plinth, a machine, a gantry arriving assembled — has to pass through that opening. Splitting the piece is a design decision and it cannot be taken before the door size is known; cutting it on site later is both restricted and visible in the finished stand.
A 2,250 kg/m² floor
All three halls we verified publish a floor load capacity of 2,250 kg/m². If you are showing heavy machinery, stone blocks or loaded racking, the calculation runs off that figure — what matters is the pressure under each foot, not the total weight. Where the load stays concentrated at a point, a steel plate or a distribution platform goes in. Still confirm the value on your own hall’s sheet.
Venues
Fairs at this venue
Fairs with a preparation page are linked; the rest stay on the list with their data.
- WorldFood Istanbul
Food Exhibition Stands·December (moved from September as of 2026)
- F Istanbul
Food Exhibition Stands·August
- IBAKTECH
Food Exhibition Stands·October
- Texhibition Istanbul
Textile & Carpet Exhibition Stands·March and September (two editions a year)
- HOMETEX
Textile & Carpet Exhibition Stands·May
- ICFE
Textile & Carpet Exhibition Stands·January
- IFCO
Textile & Carpet Exhibition Stands·February and September
- Turkchem Chem Show Eurasia
Chemicals & Plastics Exhibition Stands·November
- PHARMAIST
Chemicals & Plastics Exhibition Stands·June
- BeautyEurasia
Chemicals & Plastics Exhibition Stands·December (the 2026 edition was held in September; the slot has shifted)
- UNICERA Istanbul
Construction & Building Exhibition Stands·November (moved from its historic spring slot)
- ISK-SODEX Istanbul
Construction & Building Exhibition Stands·October
- WIN EURASIA
Machinery Exhibition Stands·June
- ANKIROS / ANNOFER / TURKCAST
Machinery Exhibition Stands·October
- EMITT
Tourism Exhibition Stands·February
- Eurasia Rail
Other·March
- IJS Istanbul Jewelry Show
Other·March/April and October (two editions a year)
- Bosphorus Boat Show
Other·February (a separate in-water edition runs at Ataköy Marina in October)
- Expomaritt Exposhipping Istanbul
Other·February
Start here
Is your fair date getting close?
Send us your floor plan, your square metres and your date. On the first reply we will tell you plainly what is possible and what will not make it.
Quotes are free and commit you to nothing.