Fairs·Textile & Carpet
ITM International Textile Machinery Exhibition Exhibition Stand
ITM International Textile Machinery Exhibition
BASELINE designs, builds and installs stands at Tüyap Fuar ve Kongre Merkezi for companies exhibiting at ITM International Textile Machinery Exhibition.
- Venue
- Tüyap Fuar ve Kongre Merkezi
- Next edition
- 13–17 June 2028
- Frequency
- Every two years
- Organiser
- Teknik Fuarcılık A.Ş. ve Tüyap Tüm Fuarcılık Yapım A.Ş., TEMSAD iş birliğiyle
- Industry
- Textile & Carpet
Fair information is taken from the organiser's own source; confirm exact dates with the organiser.
Scale
ITM 2026 (9–13 June 2026): 1,000+ exhibitors from 59 countries, 48,257 professional visitors from 105 countries. Co-located with HIGHTEX (technical textiles).
International participation
Very heavy — 47% of visitors international. One of the world's three largest textile machinery shows.
Textile & Carpet
What a stand at ITM International Textile Machinery Exhibition has to solve
Fabric sells by touch, so the stand has to bring the sample within reach of a hand.
- 01Hanging systems: to hang rolls, drapes or carpet you either buy rigging rights from the hall structure or the stand carries its own gantry.
- 02Colour has to read correctly, which means high-CRI lighting (90+) at a single colour temperature; fabric does not sell under the wrong light.
- 03Hundreds of samples need a mix of rails, shelving and drawers: swatch books at hand height, heavy rolls below waist level.
- 04Fabric surfaces absorb sound but also collect dust; finishes are chosen so they can be cleaned daily without wearing out.
Venues
Tüyap Fuar ve Kongre Merkezi
Tüyap Fair and Congress Center is a fairground on the European side of Istanbul, west of the city centre, hosting a large share of Turkey’s biggest industrial trade fairs.
- Indoor area
- 120,000 m² across 14 column-free halls
- Net exhibition capacity
- 62,000 m²
- Congress and services centre
- 10,000 m²
- Electrical infrastructure
- 28,800 kVA/h mains, 11,090 kVA/h generator
- Compressed air
- 10 bar pneumatic system
- Parking
- 1,600 covered spaces, 4,500 in total, plus a dedicated area for 25 long vehicles
The halls are column-free
All fourteen halls are column-free. In design terms that removes an effort spent at most fairgrounds: the plan does not have to work around a column, sightlines across an island stand stay open, and a long display wall can run uninterrupted. Even so, column, duct and drain positions on the plot are always confirmed against the hall plan.
Ask the organiser for the height limit
Tüyap does not publish a per-hall maximum stand height on its public pages. That does not mean there is no limit: there is one, and it comes from the technical regulations for the specific fair. The practical consequence is simple — if you are exhibiting at Tüyap, ask the organiser for that edition’s manual before design starts. Assuming a height from a number found online is a mistake that cannot be corrected on build-up day.
Outside the city centre
The venue sits outside the city centre, so both freight and the crew’s daily travel have to be planned around Istanbul traffic. On fairs with a tight build-up window that is a real line in the plan: housing the crew near the site often costs less than a day of lost overtime.
Fairs
ITM International Textile Machinery Exhibition: common questions
When and where does ITM International Textile Machinery Exhibition take place?
ITM International Textile Machinery Exhibition runs from 13–17 June 2028 at Tüyap Fuar ve Kongre Merkezi in İstanbul.
Venue and month belong to the edition rather than to the fair, and both can change from year to year — several fairs on this list have moved venue or slot. Always confirm the dates and the hall against the organiser’s own announcement.
What drives the stand design for ITM International Textile Machinery Exhibition?
The design is driven by what the product on show asks of the stand, not by the name of the fair: fabric sells by touch, so the stand has to bring the sample within reach of a hand.
Hanging systems: to hang rolls, drapes or carpet you either buy rigging rights from the hall structure or the stand carries its own gantry.
What should you watch for when building a stand at Tüyap Fuar ve Kongre Merkezi?
All fourteen Tüyap halls are column-free, so the plan never has to work around a column; on the other hand Tüyap does not publish a maximum stand height publicly, so the binding figure has to come from the organiser’s technical manual for that specific fair.
All fourteen halls are column-free. In design terms that removes an effort spent at most fairgrounds: the plan does not have to work around a column, sightlines across an island stand stay open, and a long display wall can run uninterrupted. Even so, column, duct and drain positions on the plot are always confirmed against the hall plan.
When should preparation for a stand at ITM International Textile Machinery Exhibition start?
Preparation is planned backwards from the organiser’s deadlines rather than from the fair dates: the day the stand drawings go in for approval, the day the power and rigging applications close, and the hour the build-up window opens. For this fair the fixed point is 13–17 June 2028, and the schedule is built back from there.
At quotation stage we need four things: the plot number and hall, the plot dimensions, the plot type (island, corner, in-line or peninsula) and the organiser’s technical manual for that edition. If the plot has not been allocated yet, design starts from the most restrictive assumption and is updated once the allocation arrives.
Who approves the stand drawings for ITM International Textile Machinery Exhibition?
The stand drawings are approved by the fair authority — that is, the organiser, which for this fair is Teknik Fuarcılık A.Ş. ve Tüyap Tüm Fuarcılık Yapım A.Ş., TEMSAD iş birliğiyle. Approval comes before build-up, and we prepare and submit the file as the contractor.
The file generally contains dimensioned plans and elevations, heights, the materials used and their fire classification, and the electrical load list — plus structural calculations and engineer sign-off where there is a second storey or any rigging. Deviating from the approved drawing on site can end in an instruction to dismantle.
Fairs
Other fairs in Textile & Carpet
Fairs in the same industry that have a preparation page. What the industry asks of a stand applies at these too.
Start here
Looking for a stand at ITM International Textile Machinery Exhibition?
Send us your floor plan, your square metres and your date. On the first reply we will tell you plainly what is possible and what will not make it.
Quotes are free and commit you to nothing.